当前位置： 首页 > java >正文

STC15W408AS计数器

java 2025/7/3 13:48:20

/***STC15W408AS计数器 2025 5 12 *********/
              #include     <reg52.h>             //
              #include     <intrins.H>           //
              #define      uchar  unsigned char
              #define      uint   unsigned int
              uchar        kcounter;                       
              uchar        kstatus;
              sbit         IntPut0=P3^4;         //
              sbit         IntPut1=P3^5;         //
              sbit         IntPut2=P3^6;         //
              sbit         IntPut3=P3^7;         //
              sbit         OutPut0=P3^2;         //
              sbit         OutPut1=P3^3;         //
              sbit         OutPut2=P1^3;         //
              sbit         OutPut3=P1^4;         //
              sbit         OutPut4=P1^5;         //
              uint         Counter;                           //产量计数器
              sbit         OLED_SCL=P1^1;       //
              sbit         OLED_SDA=P1^0;       //
              #define      high 1
              #define      low 0
/*************Pin Define***************/
              void         Initial_LY096BG30();
              void         Delay_50ms(uint Del_50ms);
              void         fill_picture(uchar fill_Data);
              void         IIC_Start();
              void         IIC_Stop();
              void         Write_IIC_Command(uchar IIC_Command);
              void         Write_IIC_Data(uchar IIC_Data);
              bit          Write_IIC_Byte(uchar IIC_Byte);
              void         dis_Value(uchar s);
/***********************0--A字符表*************************/
uchar code show1[]=
{
0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x0F,0x10,0x20,0x20,0x10,0x0F,0x00,/*"0",0*/
0x00,0x10,0x10,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,/*"1",1*/
0x00,0x70,0x08,0x08,0x08,0x88,0x70,0x00,0x00,0x30,0x28,0x24,0x22,0x21,0x30,0x00,/*"2",2*/
0x00,0x30,0x08,0x88,0x88,0x48,0x30,0x00,0x00,0x18,0x20,0x20,0x20,0x11,0x0E,0x00,/*"3",3*/
0x00,0x00,0xC0,0x20,0x10,0xF8,0x00,0x00,0x00,0x07,0x04,0x24,0x24,0x3F,0x24,0x00,/*"4",4*/
0x00,0xF8,0x08,0x88,0x88,0x08,0x08,0x00,0x00,0x19,0x21,0x20,0x20,0x11,0x0E,0x00,/*"5",5*/
0x00,0xE0,0x10,0x88,0x88,0x18,0x00,0x00,0x00,0x0F,0x11,0x20,0x20,0x11,0x0E,0x00,/*"6",6*/
0x00,0x38,0x08,0x08,0xC8,0x38,0x08,0x00,0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,/*"7",7*/
0x00,0x70,0x88,0x08,0x08,0x88,0x70,0x00,0x00,0x1C,0x22,0x21,0x21,0x22,0x1C,0x00,/*"8",8*/
0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x00,0x31,0x22,0x22,0x11,0x0F,0x00,/*"9",9*/
0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x1F,0x01,0x01,0x01,0x01,0x1F,0x00,/*"A",10*/
0x08,0xF8,0x08,0x08,0x08,0x10,0xE0,0x00,0x20,0x3F,0x20,0x20,0x20,0x10,0x0F,0x00,/*"D",11*/
0x08,0xF8,0x00,0xF8,0x00,0xF8,0x08,0x00,0x00,0x03,0x3E,0x01,0x3E,0x03,0x00,0x00,/*"W",12*/
0xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x10,0x20,0x20,0x20,0x10,0x0F,0x00,/*"O",13*/
0x08,0xF8,0x30,0xC0,0x00,0x08,0xF8,0x08,0x20,0x3F,0x20,0x00,0x07,0x18,0x3F,0x00,/*"N",14*/
};                               
/***********************0--A字符表*************************/
uchar code show2[]=
{
//电(0) 机(1) 开(2) 关(3) 一(4) 二(5) 三(6) 四(7) 五(8) 六(9) 七(10) 八(11) 九(12) 十(13)
0x00,0x00,0xF8,0x88,0x88,0x88,0x88,0xFF,0x88,0x88,0x88,0x88,0xF8,0x00,0x00,0x00,
0x00,0x00,0x1F,0x08,0x08,0x08,0x08,0x7F,0x88,0x88,0x88,0x88,0x9F,0x80,0xF0,0x00,/*"电",0*/
0x10,0x10,0xD0,0xFF,0x90,0x10,0x00,0xFE,0x02,0x02,0x02,0xFE,0x00,0x00,0x00,0x00,
0x04,0x03,0x00,0xFF,0x00,0x83,0x60,0x1F,0x00,0x00,0x00,0x3F,0x40,0x40,0x78,0x00,/*"机",1*/
0x80,0x82,0x82,0x82,0xFE,0x82,0x82,0x82,0x82,0x82,0xFE,0x82,0x82,0x82,0x80,0x00,
0x00,0x80,0x40,0x30,0x0F,0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,/*"开",2*/
0x00,0x00,0x10,0x11,0x16,0x10,0x10,0xF0,0x10,0x10,0x14,0x13,0x10,0x00,0x00,0x00,
0x81,0x81,0x41,0x41,0x21,0x11,0x0D,0x03,0x0D,0x11,0x21,0x41,0x41,0x81,0x81,0x00,/*"关",3*/
0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*"一",4*/
0x00,0x00,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x00,0x00,0x00,
0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x00,/*"二",5*/
0x00,0x04,0x84,0x84,0x84,0x84,0x84,0x84,0x84,0x84,0x84,0x84,0x84,0x04,0x00,0x00,
0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x00,/*"三",6*/
0x00,0xFC,0x04,0x04,0x04,0xFC,0x04,0x04,0x04,0xFC,0x04,0x04,0x04,0xFC,0x00,0x00,
0x00,0x7F,0x28,0x24,0x23,0x20,0x20,0x20,0x20,0x21,0x22,0x22,0x22,0x7F,0x00,0x00,/*"四",7*/
0x00,0x02,0x42,0x42,0x42,0xC2,0x7E,0x42,0x42,0x42,0x42,0xC2,0x02,0x02,0x00,0x00,
0x40,0x40,0x40,0x40,0x78,0x47,0x40,0x40,0x40,0x40,0x40,0x7F,0x40,0x40,0x40,0x00,/*"五",8*/
0x20,0x20,0x20,0x20,0x20,0x20,0x21,0x22,0x2C,0x20,0x20,0x20,0x20,0x20,0x20,0x00,
0x00,0x40,0x20,0x10,0x0C,0x03,0x00,0x00,0x00,0x01,0x02,0x04,0x18,0x60,0x00,0x00,/*"六",9*/
0x80,0x80,0x80,0x80,0x80,0x40,0xFF,0x40,0x40,0x40,0x20,0x20,0x20,0x20,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x40,0x40,0x40,0x40,0x40,0x40,0x78,0x00,0x00,/*"七",10*/
0x00,0x00,0x00,0x00,0x00,0xFC,0x00,0x00,0x00,0x7E,0x80,0x00,0x00,0x00,0x00,0x00,
0x00,0x80,0x60,0x18,0x07,0x00,0x00,0x00,0x00,0x00,0x03,0x0C,0x30,0x40,0x80,0x00,/*"八",11*/
0x00,0x10,0x10,0x10,0x10,0xFF,0x10,0x10,0x10,0x10,0xF0,0x00,0x00,0x00,0x00,0x00,
0x80,0x40,0x20,0x18,0x07,0x00,0x00,0x00,0x00,0x00,0x3F,0x40,0x40,0x40,0x78,0x00,/*"九",12*/
0x40,0x40,0x40,0x40,0x40,0x40,0x40,0xFF,0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*"十",13*/
};   
/**************Delay*******************************/
              void   Delay_50ms(uint Del_50ms)        //
              {
               uint m;
               for(;Del_50ms>0;Del_50ms--)
               for(m=62450;m>0;m--);
              }
/*******************IIC Start******************/
              void IIC_Start()
              {
               OLED_SCL=high;
               OLED_SDA=high;
               _nop_();
               OLED_SDA=low;
               _nop_();_nop_();
               OLED_SCL=low;
              }
/*************IIC Stop*************************/
              void IIC_Stop()
              {
              OLED_SDA=low;
              _nop_();
              OLED_SCL=high;
              _nop_();_nop_();
              OLED_SDA=high;
              }
/*****************IIC Write byte***************/
              bit Write_IIC_Byte(unsigned char IIC_Byte)
              {
              unsigned char i;
               bit Ack_Bit;                      //应答信号
               for(i=0;i<8;i++)        
               {
               if(IIC_Byte & 0x80)               //1?0?
               OLED_SDA=high;
               else
               OLED_SDA=low;
               OLED_SCL=high;
               _nop_();_nop_();
               OLED_SCL=low;
               IIC_Byte<<=1;                     //loop
               }
              OLED_SDA=high;                     //释放IIC SDA总线为主器件接收从器件产生应答信号    
              _nop_();_nop_();
              OLED_SCL=high;                     //第9个时钟周期
              _nop_();_nop_();
              Ack_Bit=OLED_SDA;                  //读取应答信号
              OLED_SCL=low;
              return Ack_Bit;    
              }  
/*************IIC Write Command*****************/
              void Write_IIC_Command(unsigned char IIC_Command)
              {
              IIC_Start();
              Write_IIC_Byte(0x78);              //Slave address,SA0=0
              Write_IIC_Byte(0x00);              //write command
              Write_IIC_Byte(IIC_Command);
              IIC_Stop();
              }
/****************IIC Write Data*****************/
              void Write_IIC_Data(uchar IIC_Data)
              {
              IIC_Start();
              Write_IIC_Byte(0x78);            
              Write_IIC_Byte(0x40);              //write data
              Write_IIC_Byte(IIC_Data);
              IIC_Stop();
              }
/********************picture**********************/
              void Clear_disp()
              {
              uchar x,y;
              for(y=0;y<8;y++)
               {
               Write_IIC_Command(0xb0+y);
               Write_IIC_Command(0x00);
               Write_IIC_Command(0x10);
                for(x=0;x<128;x++)               //横向像素
                {
                Write_IIC_Data(0X00);
                }
               }
              }
/***********************Initial code*********************/
              void  Initial_LY096BG30()
              {
              Write_IIC_Command(0xAE);   //display off
              Write_IIC_Command(0x20);   //Set Memory Addressing Mode    
              Write_IIC_Command(0x10);     //00,Horizontal Addressing Mode;01,Vertical Addressing Mode;10,Page Addressing Mode (RESET);11,Invalid
              Write_IIC_Command(0xb0);     //Set Page Start Address for Page Addressing Mode,0-7
              Write_IIC_Command(0xc8);      //Set COM Output Scan Direction
              Write_IIC_Command(0x00);   //---set low column address
              Write_IIC_Command(0x10);   //---set high column address
              Write_IIC_Command(0x40);   //--set start line address
              Write_IIC_Command(0x81);   //--set contrast control register
              Write_IIC_Command(0x7f);
              Write_IIC_Command(0xa1);   //--set segment re-map 0 to 127
              Write_IIC_Command(0xa6);   //--set normal display
              Write_IIC_Command(0xa8);   //--set multiplex ratio(1 to 64)
              Write_IIC_Command(0x3F);   //
              Write_IIC_Command(0xa4);   //0xa4,Output follows RAM content;0xa5,Output ignores RAM content
              Write_IIC_Command(0xd3);   //-set display offset
              Write_IIC_Command(0x00);   //-not offset
              Write_IIC_Command(0xd5);   //--set display clock divide ratio/oscillator frequency
              Write_IIC_Command(0xf0);   //--set divide ratio
              Write_IIC_Command(0xd9);   //--set pre-charge period
              Write_IIC_Command(0x22);   //
              Write_IIC_Command(0xda);   //--set com pins hardware configuration
              Write_IIC_Command(0x12);
              Write_IIC_Command(0xdb);   //--set vcomh
              Write_IIC_Command(0x20);   //0x20,0.77xVcc
              Write_IIC_Command(0x8d);   //--set DC-DC enable
              Write_IIC_Command(0x14);   //
              Write_IIC_Command(0xaf);   //--turn on oled panel
             }
/****************按键计数器状态寄存器归零*************/
              void RstKey(void)
              {
              kcounter=0;                        //按键计数器归零
              kstatus=0;                         //状态寄存器归零
              }
/*****************按键低电平检测函数*****************/
              void   LowVoltKey(void)            //按键计数器状态标志加一
              {
              kcounter++;                       
              kstatus++;     
              _nop_();                           //延时                  
              }
/*****************按键低电平检测函数*****************/
              void   HighVoltKey(void)
              {
              kcounter++;                       
              kstatus=0;     
              _nop_();                           //延时                  
              }
/*****16X16中文字体显示子程序 dd字符数组地址***/
/***xx横向坐标 10～17 yy竖向坐标B0 B2 B4 B6***/
/***void Display(0x10,0XB0,0X00)***/                           
              void Display(uchar xx,yy, uint dd)
              {
              uchar x,y;
              uint  i=0;
              uint  Cnt=32;
              for(y=0;y<2;y++)
               {
               Write_IIC_Command(yy+y);          //竖向第yy行    yy=0XB0 0XB2 0XB4 0XB6
               Write_IIC_Command(0x00);          //
               Write_IIC_Command(xx);               //横向第XX个字
                for(x=0;x<16;x++)                     //横向像素
                {
                Write_IIC_Data(show2[x+y*16+Cnt*dd]); //字符表第dd个字
                }
               }   
              }                             
/*****************产量显示****************/   
              void DisDelayTime(uchar xx,yy,uint RunTime)
              {
               uchar x,y;
               uint i=0;
               uchar A1,A2,A3;
               A1=RunTime/100;
               A2=(RunTime-A1*100)/10;
               A3=RunTime-A1*100-A2*10;
               for(y=0;y<2;y++)                  //百位显示
               {
               Write_IIC_Command(yy+y);          //纵向页
               Write_IIC_Command(00);            //横向离左部边缘开始的距离
               Write_IIC_Command(xx);            //横向第四个字
                for(x=0;x<8;x++)                 //横向像素
                {
                Write_IIC_Data(show1[x+y*8+A1*16]);     //百位显示 0--A字符表
                }
                for(x=0;x<8;x++)                 //横向像素
                {
                Write_IIC_Data(show1[x+y*8+A2*16]);    //十位显示
                }
               }
               for(y=0;y<2;y++)                 
                {
                Write_IIC_Command(yy+y);       //纵向页
                Write_IIC_Command(00);           //横向离左部边缘开始的距离
                Write_IIC_Command(xx+1);         //横向第五个字
                 for(x=0;x<8;x++)                //横向像素
                 {
                 Write_IIC_Data(show1[x+y*8+A3*16]); //个位显示
                 }
               }
             }                           
/***************************************/
              void t0int()interrupt 1
              {
               OutPut0=~OutPut0;
              }
/***************************************/
              void  main()                       //
              {
               P1M0=0X00;                        //1.0~1.5准双向输入
               P1M1=0X00;                        //1.6~1.7推挽输出
               P3M0=0X00;                        //准双向输入
               P3M1=0X00;                        //准双向输入
               P5M0=0X30;                        //
               P5M1=0X00;                        //
               EA=1;                             //
               Counter=0;
               Initial_LY096BG30();
               Clear_disp();
               Delay_50ms(20);
               Display(0X16,0XB0,1);
               DisDelayTime(0X10,0XB0,100);
               RstKey();
               LowVoltKey();
               HighVoltKey();
               AUXR=0X80;
               TMOD=0X04;
               TL0=0XFF;
               TH0=0XFF;
               ET0=1;
               TR0=1;
                  EA=1;
               while(1)                          //
                {
                 Delay_50ms(20);
                 OutPut2=~OutPut2;         //
                }                                //
              }                                  //L308 CODE1583

http://www.xdnf.cn/news/5594.html

相关文章：

  • 【C++11】异常
  • 配置集群-日志聚集操作
  • 三大告警方案解析：从日志监控到流处理的演进之路
  • 长度最小的子数组（leetcode）
  • C++ 与 Go、Rust、C#：基于实践场景的语言特性对比
  • 风车OVF镜像：解放AI开发限制的Ubuntu精简系统
  • 【vue】全局组件及组件模块抽离
  • Maven 项目中将本地依赖库打包到最终的 JAR 中
  • 如何使用主机名在 CMD 中查找 IP 地址？
  • leetcode 18. 四数之和
  • 力扣 旋转图像
  • 横向移动（上）
  • zorin系统详解
  • 牛客周赛 Round 92(再现京津冀蓝桥杯？？？)
  • C++23 中的 views::stride：让范围操作更灵活
  • 「华为」人形机器人赛道投资首秀！
  • STM32核心机制解析：重映射、时间片与系统定时器实战——从理论到呼吸灯开发
  • fiddler 配置ios手机代理调试
  • 保持Word中插入图片的清晰度
  • ✅ TensorRT Python 安装精简流程（适用于 Ubuntu 20.04+）
  • CVPR2025 | Prompt-CAM: 让视觉 Transformer 可解释以进行细粒度分析
  • 如何应对网站被爬虫和采集？综合防护策略与实用方案
  • 5.12第四次作业
  • spring常用注解
  • 从海洋生物找灵感：造个机器人RoboPteropod，它能在水下干啥？
  • 【C++贪心】P11044 [蓝桥杯 2024 省 Java B] 食堂|普及
  • 华为FAT AP配置 真机
  • Java学习手册：服务网关与路由
  • 《Effective Python》第1章 Pythonic 思维详解——深入理解流程控制中的解构利器match
  • Bravery靶机通关笔记