VBA 64位API声明语句第010讲
跟我学VBA，我这里专注VBA, 授人以渔。我98年开始，从源码接触VBA已经20余年了，随着年龄的增长，越来越觉得有必要把这项技能传递给需要这项技术的职场人员。希望职场和数据打交道的朋友，都来学习VBA,利用VBA,起码可以提高自己的工作效率，可以有时间多陪陪父母，多陪陪家人，何乐而不为呢？我的教程一共九套，从入门开始一直讲到程序的分发，是学习利用VBA的实用教程。这份API资料是随高级教程赠送的.
这讲我们继续学习VBA 64位API声明语句第010讲，这些内容是MS的权威资料，看似枯燥，但对于想学习API函数的朋友是非常有用的。
【分享成果，随喜正能量】162 修行，不是让你什么都顺，而是让你知道为什么不顺？心里执着的多，磨难就越多，越想得到什么，就会失去什么。修行，不是等待菩萨来救赎，而是需要自渡，去向内求，提升自己的内在认知，修正自己的贪、嗔、痴、慢、疑，圆满自己，利益他人。
当学员学习到高级阶段，如果引用API，这个资料可以直接查到64位写法。大多数情况下我们是将低版本的程序文件升级到高版本，这时您就不必为如下的错误提示所困扰了：
End Type
Type EXIT_THREAD_DEBUG_INFO
dwExitCode As Long
End Type
Type EXIT_PROCESS_DEBUG_INFO
dwExitCode As Long
End Type
Type LOAD_DLL_DEBUG_INFO
hFile As LongPtr
lpBaseOfDll As LongPtr
dwDebugInfoFileOffset As Long
nDebugInfoSize As Long
lpImageName As LongPtr
fUnicode As Integer
End Type
Type UNLOAD_DLL_DEBUG_INFO
lpBaseOfDll As LongPtr
End Type
Type OUTPUT_DEBUG_STRING_INFO
lpDebugStringData As String
fUnicode As Integer
nDebugStringLength As Integer
End Type
Type RIP_INFO
dwError As Long
dwType As Long
End Type
' GetDriveType return values
Const DRIVE_REMOVABLE = 2
Const DRIVE_FIXED = 3
Const DRIVE_REMOTE = 4
Const DRIVE_CDROM = 5
Const DRIVE_RAMDISK = 6
Const FILE_TYPE_UNKNOWN = &H0
Const FILE_TYPE_DISK = &H1
Const FILE_TYPE_CHAR = &H2
Const FILE_TYPE_PIPE = &H3
Const FILE_TYPE_REMOTE = &H8000&
Const STD_INPUT_HANDLE = -10&
Const STD_OUTPUT_HANDLE = -11&
Const STD_ERROR_HANDLE = -12&
Const NOPARITY = 0
Const ODDPARITY = 1
Const EVENPARITY = 2
Const MARKPARITY = 3
Const SPACEPARITY = 4
Const ONESTOPBIT = 0
Const ONE5STOPBITS = 1
Const TWOSTOPBITS = 2
Const IGNORE = 0 ' Ignore signal
Const INFINITE = &HFFFFFFFF ' Infinite timeout
' Comm Baud Rate indices
Const CBR_110 = 110
Const CBR_300 = 300
Const CBR_600 = 600
Const CBR_1200 = 1200
Const CBR_2400 = 2400
Const CBR_4800 = 4800
Const CBR_9600 = 9600
Const CBR_14400 = 14400
Const CBR_19200 = 19200
Const CBR_38400 = 38400
Const CBR_56000 = 56000
Const CBR_57600 = 57600
Const CBR_115200 = 115200
Const CBR_128000 = 128000
Const CBR_256000 = 256000
' Error Flags
Const CE_RXOVER = &H1 ' Receive Queue overflow
Const CE_OVERRUN = &H2 ' Receive Overrun Error
Const CE_RXPARITY = &H4 ' Receive Parity Error
Const CE_FRAME = &H8 ' Receive Framing error
Const CE_BREAK = &H10 ' Break Detected
Const CE_TXFULL = &H100 ' TX Queue is full
Const CE_PTO = &H200 ' LPTx Timeout
Const CE_IOE = &H400 ' LPTx I/O Error
Const CE_DNS = &H800 ' LPTx Device not selected
Const CE_OOP = &H1000 ' LPTx Out-Of-Paper
Const CE_MODE = &H8000& ' Requested mode unsupported
Const IE_BADID = (-1) ' Invalid or unsupported id
Const IE_OPEN = (-2) ' Device Already Open
Const IE_NOPEN = (-3) ' Device Not Open
Const IE_MEMORY = (-4) ' Unable to allocate queues
Const IE_DEFAULT = (-5) ' Error in default parameters
Const IE_HARDWARE = (-10) ' Hardware Not Present
Const IE_BYTESIZE = (-11) ' Illegal Byte Size
Const IE_BAUDRATE = (-12) ' Unsupported BaudRate
' Events
Const EV_RXCHAR = &H1 ' Any Character received
Const EV_RXFLAG = &H2 ' Received certain character
Const EV_TXEMPTY = &H4 ' Transmitt Queue Empty
Const EV_CTS = &H8 ' CTS changed state
Const EV_DSR = &H10 ' DSR changed state
Const EV_RLSD = &H20 ' RLSD changed state
Const EV_BREAK = &H40 ' BREAK received
Const EV_ERR = &H80 ' Line status error occurred
Const EV_RING = &H100 ' Ring signal detected
Const EV_PERR = &H200 ' Printer error occured
Const EV_RX80FULL = &H400 ' Receive buffer is 80 percent full
Const EV_EVENT1 = &H800 ' Provider specific event 1
Const EV_EVENT2 = &H1000 ' Provider specific event 2
' Escape Functions
Const SETXOFF = 1 ' Simulate XOFF received
Const SETXON = 2 ' Simulate XON received
Const SETRTS = 3 ' Set RTS high
Const CLRRTS = 4 ' Set RTS low
Const SETDTR = 5 ' Set DTR high
Const CLRDTR = 6 ' Set DTR low
Const RESETDEV = 7 ' Reset device if possible
Const SETBREAK = 8 'Set the device break line
Const CLRBREAK = 9 ' Clear the device break line
' PURGE function flags.
Const PURGE_TXABORT = &H1 ' Kill the pending/current writes to the comm port.
Const PURGE_RXABORT = &H2 ' Kill the pending/current reads to the comm port.
Const PURGE_TXCLEAR = &H4 ' Kill the transmit queue if there.
Const PURGE_RXCLEAR = &H8 ' Kill the typeahead buffer if there.
Const LPTx = &H80 ' Set if ID is for LPT device
' Modem Status Flags
Const MS_CTS_ON = &H10&
Const MS_DSR_ON = &H20&
Const MS_RING_ON = &H40&
Const MS_RLSD_ON = &H80&
' WaitSoundState() Constants
Const S_QUEUEEMPTY = 0
Const S_THRESHOLD = 1
Const S_ALLTHRESHOLD = 2
' Accent Modes
Const S_NORMAL = 0
Const S_LEGATO = 1
Const S_STACCATO = 2
' SetSoundNoise() Sources
Const S_PERIOD512 = 0 ' Freq = N/512 high pitch, less coarse hiss
Const S_PERIOD1024 = 1 ' Freq = N/1024
Const S_PERIOD2048 = 2 ' Freq = N/2048 low pitch, more coarse hiss
Const S_PERIODVOICE = 3 ' Source is frequency from voice channel (3)
Const S_WHITE512 = 4 ' Freq = N/512 high pitch, less coarse hiss
Const S_WHITE1024 = 5 ' Freq = N/1024
Const S_WHITE2048 = 6 ' Freq = N/2048 low pitch, more coarse hiss
Const S_WHITEVOICE = 7 ' Source is frequency from voice channel (3)
Const S_SERDVNA = (-1) ' Device not available
Const S_SEROFM = (-2) ' Out of memory
Const S_SERMACT = (-3) ' Music active
Const S_SERQFUL = (-4) ' Queue full
Const S_SERBDNT = (-5) ' Invalid note
Const S_SERDLN = (-6) ' Invalid note length
Const S_SERDCC = (-7) ' Invalid note count
Const S_SERDTP = (-8) ' Invalid tempo
Const S_SERDVL = (-9) ' Invalid volume
我20多年的VBA实践经验，全部浓缩在下面的各个教程中：
